HN-8806 Two-component Addition Type Potting Compound
HN-8808, two parts, low viscosity potting compound that cures at room temperature to soft pliable
rubber.
1. This potting silicone rubber has high moisture resistance and a wide temperature range of - 57°C to 250°C.
2. Condensed liquid silicone rubber does not use polar compounds as raw materials, and does not release by-products during cross-linking, and can maintain better electrical properties
under harsh conditions.
3. Non-toxic, odorless, non-corrosive, non-swelling.
4. It has adhesive force, has adhesion to metal aluminum, iron, acrylic, and PC plastic, and can improve waterproof sealing performance
| | | |
| | | Transparent / White/ Grey Liquid |
| | Viscosity mPa.S (before curing) | |
| | | |
| | In commission time (h,25C) | |
| | Entirely sulphuration time (min,25C) | |
| | | |
| | | |
| | Strength of breakdown voltage (kv/mm) | |
| | Dielectric constant (1MHZ) | |
| | | |
| | Thermal conductivity (w/m.k) | |
* Noted:
1. Parameters can be adjusted as required.
2. The data in this product description are non-standard values.
3. Test first before using.
Widely used in sealing, electrical, potting, insulation, antifouling, waterproof, shockproof, coating, electronic appliances, and comprehensive household appliances.
Packing, Storage and Warranty
(1)Packaging: Component A: 5KG/10KG/25kg/drum Component B: 5KG/10KG/25kg/drum (2)Storage and transportation: This product is non-toxic and non-dangerous, handled as general chemicals, and stored in a cool (room temperature) dry place.
(3)Shelf life: 6 months, please re-inspect after the expiration date; if it meets the standard, it can still be used.
According to the dosage, pour it into the mold after mixing according to A: B=10:1. Remove the surface bubbles and cure at room temperature (the proportion can be adjusted according to actual needs, the larger the proportion of component B, the faster the curing).
