Shenzhen Haneste New Material co.,LTD
Shenzhen Haneste New Material co.,LTD
Add to Cart
High Hardness Chemical Resistant Epoxy Potting Glue Automotive Marine and Industrial Applications for Transformers Resistors Filters Electronics
HN-5508 Epoxy Resin Potting Compound
Product Specification
| Before curing | builder | Epoxy resin 5508 | Curing agent 5508 |
| pigment | Black / White et al | Ruburn / transparent surface | |
| Surface | A sticky epoxy resin water | r liquid specific | |
| specific gravity, g / cm3 | 1.4-1.5 | 1.05 | |
| Viscosity of 25℃ | 4,500—6,000cp s | 150—250cp storage | |
| storage Period (25℃) | Six months | x months | |
| processabilility | mixing ratio | A: B =5:1 (weight ratio) | |
| Available for a time of 25℃ | 2-3H (100g mix) | ||
| curing time | 25℃ / 6-8H surface stem, 12-16H fully cured or 60-80℃/1.5-2H | ||
| After curing | Tensile strength of kg/cm | 16-18 | |
| Compressive strength of kg/cm | 18-22 | ||
| Resistance to the voltage of kv/mm | 20-22 | ||
| Surface resistance ofΩ-cm | 14 | ||
| 1.2*10 | |||
| Volume resistance ofΩ-cm | 15 | ||
| 1.1*10 | |||
| contraction percentage% | 0.35-0.55 | ||
| Water absorption rate was 25℃ * 24H | <0.03% | ||
| The hardness of SHORE A | 85-95 | ||
| Distortion temperature ℃ | 130-150 | ||
| low temperature resistant ℃ | -30 | ||
Product Describtion
HN-5508 is an epoxy potting compound suitable for industrial equipment. It has excellent temperature resistance, chemical resistance and mechanical strength. It is widely used in industrial applications such as high-voltage packaging, aquarium equipment and ultrasonic atomizers.
Product Highlights
High temperature resistance: The operating temperature range is -30°C to 130-150°C, suitable for extreme industrial environments.
Chemical resistance: Acid and alkali resistance, moisture resistance, aging resistance, suitable for harsh conditions.
High mechanical strength: Hardness 85-95 SHORE D, providing excellent compression and impact resistance.
Technical parameters
Viscosity (Component A: 4500-6000 cps, Component B: 150-250 cps)
Hardness (SHORE D): 85-95
Tensile strength: 16-18 kg/cm²
Compressive strength: 18-22 kg/cm²
Application scenarios
High-voltage packaging: used for insulation and protection of high-voltage equipment.
Aquarium equipment: Provide waterproof and moisture-proof sealing.
Ultrasonic atomizer: Enhance the durability and reliability of equipment.
Usage method
Mix according to the weight ratio of A:B = 5:1 and use.
Fully cure in 12-16 hours at 25℃, or 1.5-2 hours at 60-80℃.
Packing specifications
30 KG/group (Component A 25 KG/barrel, Component B 5 KG/can)