Shenzhen Haneste New Material co.,LTD
Shenzhen Haneste New Material co.,LTD
Add to Cart
0.8 W/M·K Silicone Potting Compound 1:1 Two-Component Addition Type Silicone Potting Rubber For Electronic Components High And Low Temperature Resistance Silicone Potting Material
HN-8806, two-component addition type silicone potting rubber which can be cured into high-performance elastomer by room temperature or heating.
This potting silicone rubber has excellent electrical insulation, high moisture resistance, and a wide temperature range of -50°C to 250°C.
Low-viscosity potting compound that Will cure in deep sections. Low shrinkage rate after curing, will not emit heat and by-products, no corrosion for filling and sealing components.
| Test Items | Test Standard | Units | Product test results | |||
| Part A | Part B | |||||
| Before curing | 1 | Appearance | --- | --- | Grey, fluid | White, fluid |
| 2 | Viscosity | GB/T10247-2008 | 25ºC, mPa·S | 4500~5000 | 4500~5000 | |
| 3 | Density | GB/T 13354-92 | 25ºC, g/cm³ | 1.50±0.05 | 1.50±0.05 | |
| 4 | Mixing Ratio (A : B) | 1:01 | Weight ratio | 100 | 100 | |
| Volume ratio | 100 | 100 | ||||
| 5 | Operating time | Measured | hr | 0.3-0.4 | ||
| 6 | Curing condition | Measured | hr | 4^12 (25ºC,initial cure) | ||
| 0.20 (80ºC) | ||||||
| After Curing | 7 | Appearance | --- | --- | Grey elastomer | |
| 8 | Hardness | GB/T 531.1-2008 | Shore A | 50±5 | ||
| 9 | Thermal conductivity | GB/T10297-1998 | w/m·k | ≥0.76 | ||
| 10 | Expansivity | GB/T20673-2006 | μm/(m,ºC) | 210 | ||
| 11 | Moisture Absorption | GB/T 8810-2005 | 24h,25ºC, % | 0.01~0.02 | ||
| 12 | Volume resistivity | GB/T 1692-92 | (DC500V),Ω · cm | 1.0×10¹⁵ | ||
| 13 | Dielectric intensity | GB/T 1693-2007 | Kv/mm(25ºC) | 18^25 | ||
| 14 | Temperature Resistance | Measured | ºC | -50~+250°c | ||
Product application:
1) Application in the power industry
It is widely used in insulation and moisture-proof sealing, environmental protection and corrosion protection, encapsulation and bonding of cable accessories.
2) Application in the electronics and radio industry
Room temperature curing silicone sealants are widely used in encapsulation, infusion, bonding, impregnation and coating in this field.
3) Application in the automotive electronics field
Silicone potting glue is used in various control modules to perform overall and general potting of components to achieve the basic requirements of moisture-proof, anti-fouling and anti-corrosion.
4) Application in the power supply industry
Due to the unique properties of silicone materials, excellent properties such as moisture-proof, electrical insulation, high and low temperature resistance, and chemical stability
* Packing *
10KG / Set (A, 5kg + B, 5kg)
20KG / Set (A, 10kg + B, 10kg)
50KG / Set (A, 25kg + B, 25kg)
- Storage and transportation:good
This product is a non-toxic non-dangerous goods, according to the general chemical handling, stored in a cool & dry place (room temperature).
- Shelf Life: 6 months, overdue please reinspect; If it meets the standard, it can still be used.