Shenzhen Haneste New Material co.,LTD
Shenzhen Haneste New Material co.,LTD
Add to Cart
Description of Tin Cure Silicone Rubber
LSR-97XXAB series belongs to gas phase liquid silicone rubber, which is suitable for baby industry, daily necessities industry, kitchen supplies, electronic product encapsulation, etc. Due to its high viscosity, it is suitable for 1:1 injection molding. Can pass FDA, ROHS, REACH and other testing, hardness range: 15-70 degrees.
Technical parameter of Tin Cure Silicone Rubber
| Project
| Require | ||||||
| LSR-9715AB | LSR-9720AB | LSR-9730AB | LSR-9740AB | LSR-9750AB | LSR-9760AB | LSR-9770AB | |
| Exterior | Transparent, no obvious mechanical impurities | ||||||
| Density (g/cm³) | 1.11±0.03 | 1.12±0.03 | 1.13±0.03 | 1.14±0.03 | 1.14±0.03 | 1.15±0.03 | 1.15±0.03 |
| Hardness (ShoreA) | 15±2 | 20±2 | 30±2 | 40±2 | 50±2 | 60±2 | 65±2 |
| Tensile strength (Mpa)≥ | 4.0 | 6.0 | 7.0 | 7.5 | 8.0 | 8.0 | 7.5 |
| Elongation(%) | 600 | 700 | 700 | 600 | 450 | 400 | 300 |
| Tear strength (kn/m)≥ | 8 | 10 | 15 | 18 | 22 | 22 | 22 |
Feature of Tin Cure Silicone Rubber
1. Excellent transparency, good elasticity
2. The product has strong stability and fast molding speed, which is several times faster than the molding process.
3. No yellowing for a long time, light specific gravity, and less waste.
Vulcanization conditions:
Vulcanization temperature 120-150°C, vulcanization time 30-60S (depending on the product)
Package
25KG or 200KG / Drum
* Store in a cool place, pay attention to moisture.
